Today I decided to get started on building a tank stand for the 20 Gallon Long Southeast Asian tank. I’ve never built a stand before, nor have I ever used a circular saw. After a visit to Home Depot, I got some basic supplies to get started, including a sawhorse, a clamp, carpenter’s triangle, and a set of screws. I already had a tape measure, drill, and a small handheld circular saw.
With the supplies gathered, my wife helped me make the first cut. We are using 2×4’s, which are overkill, but there is a method to the madness. To complete the goal of converting the 40 gallon breeder into a display tank, we need to replace the ugly iron stand. The techniques and basic frame design here will be used on the 40 gallon later on, so this is more of a test to ensure everything goes together properly. This was my wife’s first time using a circular saw as well, so a learning experience for both of us! The cuts were very quick and without any issues. We used the carpenter’s triangle clamped down to help guide the saw. I will definitely need a couple more clamps to help hold down the wood to the sawhorse in the near future.
After everything was cut, we drilled and screwed together the pieces, to form the bottom frame of the stand. The top will be an exact duplicate of this as well. The stand is designed to hide the bottom black frame when completed, so the entire frame will be covered in 1/4″ plywood, and moldings will be added to the top and bottom. There will be a shelf, and a door, but we are still deciding on how that door will work (or if we will have two smaller doors instead of one huge one).
Here is the tank on the stand frame. We will need to get some legs to build on top of this, which will be over the next couple days. Overall, this seems quite easy so far. I’m not sure why I waited so long to try and build my own stand!